Power amplifier module power (8Ω): 300W
Power amplifier module power (4Ω): 600W
THD+N (10% of rated power): <0. 6%
IMD-SMPTE (10% of rated power): 0. 9%
CROSSTALK:>65dB
Frequency response (Hz): 93dB
Signal-to-noise ratio (A): >93dB
Power input AC: 220V 50/60Hz
Operating temperature: (-15°C~+40°C)
| Model | iSpeaker DAP10 |
| Name | Dante Active full-range speakers, 10” |
| Unit configuration | 10″(250 mm) ferrite bass, 1.5″(34 mm) ferrite treble drive |
| Frequency response (±3dB) | 50Hz-20kHz |
| Rated power | 120W |
| Sensitivity (1W/1m) | 90dB |
| Maximum noise pressure level (SPL) | 118dB |
| Standard impedance | 8Ω |
| Covering Angle (H x V) | 80°x 80° |
| Dante Digital Network interface | 2 x RJ45 interface |
| Analog interface | 1 x XLR balanced input, 1 x XLR balanced output |
| Active power amplifier module | 200W |
| Volume knob control | Yes |
| Central control interface | RS232 |
| Lifting accessories | U-shaped rack |
| Size (W x H x D) | 308 x 486 x 290 mm |
| Net weight (kg) | 12.2kg |
Get in touch with INFOBIT team!
