iSwitch 201K

18Gbps HDMI+USB-C KVM Switcher KIT

HDMI 2.0, highest support 4K@60HZ 4:4:4, HDR10 and Dolby Vision, HDCP 2.2

1 x HDMI input, 1 x USB-B host, 1 x USB-C input, 1 x HDMI output and 1 x HDBaseT output

HDBT 3.0, supports 100m transmission and bidirectional 48V PoC

Support RS232 control and CEC control

USB-C input support 60W external charging

Auto switch 5V or TMDS detection

Support Dry Contact control

Chat Now

For Huddle/ Small Room

The iSwitch 201K is compatible with iCam VB series all-in-one camera video bar for huddle or small meeting room.

For medium-to-large Room

The iSwitch 201K is compatible with iCam series PTZ camera and iSpeaker series speakerphone/microphone for medium-to-large meeting room.

Datasheet

Model	iSwitch 201K
Name	18Gbps HDMI+USB-C KVM Switcher KIT
Video
Video Input	(1) HDMI IN, (1) USB-C IN	(1) HDBT IN
Video Output Connector	(1) Type-A female HDMI (1) Type-C	(1) RJ45
Input Resolution	HDMI: Up to 4K@60Hz 4:4:4 HDR10, Dolby Vision USB-C: Up to 4K@60Hz 4:4:4	Up to 4K@60Hz 4:2:0
Video Output	(1) HDMI OUT (1) HDBT OUT	(1) HDMI
Video Output Connector	(2) Type-A female HDMI	(1) Type-A female HDMI
Output Resolution	HDMI: Up to 4K@60Hz 4:4:4 HDR10, Dolby Vision HDBT: Up to 4K@60Hz 4:2:0	Up to 4K@60Hz 4:4:4 HDR10, Dolby Vision
HDMI Standard	Up to HDMI 2.0b	Up to HDMI 2.0b
HDCP Version	Up to HDCP 2.2	Up to HDCP 2.2
Audio
HDMI Embedded Audio Format	LPCM 7.1 audio, Dolby Atmos®, Dolby® TrueHD, Dolby Digital® Plus, DTS:X™, and DTS-HD® Master Audio™ pass-through.
Audio Output Connector	(1) 5-pin terminal block	(1) 5-pin terminal block
Frequency Response	20Hz–20KHz, ±3dB
Max Output Level	0.88 Vrms ± 0.5 dB. 2 V = 16 dB headroom above -10 dBV (316 mV) nominal consumer line level signal SPDIF: ±0.05dBFS
THD+N	< 0.05% (-80 dB), 20 Hz – 20 kHz bandwidth, 1 kHz sine at 0 dBFS level (or max level)
SNR	> 80dB, 20Hz-20 kHz bandwidth SPDIF: > 90dB, 20Hz-20 kHz bandwidth
Crosstalk Isolation	< -80 dB, 10 kHz sine at 0 dBFS level (or max level before clipping)
L-R Level Deviation	< 0.3 dB, 1 kHz sine at 0 dBFS level (or max level before clipping)
Output Load Capability	1k ohm and higher (supports 10x paralleled 10k ohm loads)
Noise Level	>70dB @ 1 kHz
Control
Control port	(1) EDID switch, (2) DEVICES (1) ETHERNET, (1) FW, (1) HOST, (2) GR, (2) RS232 (1) TCP/IP	(4) DEVICE, (1) ETHERNET (1) RS232
Control Connector	(1) 4-pin DIP switch (2) USB Type-A, (1) RJ45 (1) Micro-USB, (1) USB Type-B (2) 3-pin terminal block (2) 3-pin terminal block, (1) RJ45	(3) USB Type-A, (1) USB Type-C (1) RJ45, (1) 3-pin terminal block
General
Operation Temperature	-5 ~ +55℃
Storage Temperature	-25 ~ +70℃
Relative Humidity	10% ~ 90%
External Power Supply	Input: AC 100~240V, 50/60Hz; Output: 24V DC 5A.
Power Consumption	76.5W (Max)
USB-C Power Charging	60W(Max)
Dimension (WHD)	265W x 150D x 32H mm	173W x 95D x 24.5H mm
Net Weight	1020g	410g

Diagram

Download

iSwitch 201K User Manual_V1.0.pdf

1.11M

2024-09-02
iSwitch 201K datasheet_V1.0.pdf

0.51M

2024-09-02
INFOBIT iSwitch 201K ThinkSmart integration solution V1.1.pdf

0.77M

2024-09-02

LEAVE MESSAGE

Get in touch with INFOBIT team!