iSwitch-2000D-WPT--B0
iSwitch 2000D-WPT

4K60 JPEG 2000 AV over IP Wallplate Encoder, with Dante

JPEG 2000

JPEG 2000

4K60

4K60

KVM

KVM

Matrix

Matrix

Video Wall

Video Wall

Dante

Dante

iSwitch 2000D-WPT
iSwitch 2000D-WPT
iSwitch 2000D-WPT
iSwitch 2000D-WPT
iSwitch 2000D-WPT
iSwitch 2000D-WPT
iSwitch 2000D-WPT
iSwitch 2000D-WPT
iSwitch 2000D-WPT

Support 18Gbps video bandwidth, HDCP 2.2, and DP 1.2

Input and output video resolution is up to 4K60 4:4:4

Signal transmission distance can be extended up to 328ft/100m via CAT6/6A/7 cable

Transmit video, analog audio, RS-232, CEC and USB signal over Ethernet

Support USB 2.0 and KVM function

US 2-Gang wall-plate

With HDMI and USB-C dual inputs, supporting auto-switching and manual switching modes

The USB-C 1 port supports video/audio/USB data transmission and power charging.

Audio embedding and de-embedding are supported

Dante AV-A mode is supported

Support unicast and multicast functions

Support point-to-point, video matrix, and video wall functions (video wall supports up to 9×9)

Built-in MJPEG Substream for video real-time preview on portable devices

Support 1G Ethernet Switch, router and hub device transmission

Standard PoE (802.3at PD device) or local 12V power supply

Built-in web page configuration and control, Telnet and SSH as well

Support HDR10, Dolby Vision, HLG bypass

Flexible control via Web GUI/TCP/RS-232 and third-party central control

Works with iSwitch 2000D-R

iSwitch 2000D-WPT
iSwitch 2000D-WPT
iSwitch 2000D-WPT
iSwitch 2000D-WPT
 Dante Ready
Dante Ready
The iSwitch 2000D-WPT is automatically discovered and ready to use when connected, and no separate power supplies are required – just use a common PoE (Power over Ethernet) switch. Compatible with INFOBIT Dante speakers.
 Point-to-Point
Point-to-Point
iSwitch 2000D AV over IP products are a direct replacement for AV Matrix (HDbaseT) solutions. Leverage IP infrastructure to route AV signals in offices, huddle rooms, conference rooms, or as content contribution (trunking) between locations. True plug-and-play, no need any IP settings.
 One-to-Many
One-to-Many
iSwitch 2000D efficiently deliver high-quality, low latency, AV to many displays on a floor, between floors, or across the entire organization.
 Many-to-One Switching
Many-to-One Switching
iSwitch 2000D lets you take content from multiple encoders and deliver it to one decoder connected to the same managed Ethernet switch.
 Many-to-Many Video Wall
Many-to-Many Video Wall
iSwitch 2000D include video wall processing that allows encoded AV content to be presented across an array of displays.
 Many-to-Many Matrix Switching
Many-to-Many Matrix Switching
Digital signage systems are usually asymmetrical – a few sources feeding a large number of destinations.
iSwitch simply integrates decoder and network drop for each display.
 Preview Source
Preview Source
With preview of all signal content.
 Support portrait layouts
Support portrait layouts
It supports 90°, 180°, 270° screen installation.
Datasheet
Model iSwitch 2000D-WPT
Name 4K60 JPEG 2000 AV over IP Wallplate Encoder, with Dante
HDMI Compliant HDMI 2.0b
HDCP Compliant HDCP 2.2
Video Bandwidth 18Gbps
USB Bandwidth 480Mbps
Video Compression Standard JPEG2000
Video Network Bandwidth 1G
Input Video Resolution Up to 4096×2160 60Hz, more details refer to the user manual.
Output Video Resolution Depends on the optional decoder
Color Depth Input: 8/10/12-bit, 8-bit (4K60Hz 4:4:4) Output: 8-bit
Color Space RGB, YCbCr 4:4:4 / 4:2:2. YUV 4:2:0
Transmission Distance 100M (CAT6/6A/7)
Audio Formats LPCM 2.0/5.1/7.1CH, Dolby Digital/Plus/EX, Dolby True HD, Dolby Atmos, DTS, DTS-96/24, DTS-EX DSD, DTS High Res, DTS-HD Master, DTS:X
Input/Output Audio Impedance >=10k ohms/330 ohms
Line Input/Output Level (Maximum) 1Vrms/1Vrms
Frequency Response (+0.5dB, -1dB) 20Hz ~ 20kHz
Audio Output Sync Delay TBD
Audio S/N Ratio >90dB@ HDMI 0dB, 1kHz A-weighted
Audio THD+N <0.05%@ HDMI 0dB, 1KHz
ESD Protection IEC 61000-4-2: ±15kV (Air-gap discharge) & ±8kV (Contact discharge)
Encoder Input: 1x HDMI IN [HDMI Type A, 19-pin female] 2x USB-C IN [USB Type C, 24-pin female]
1x AUDIO IN [3pin-3.5mm Phoenix connector]
Output:1x AUDIO OUT [3pin-3.5mm Phoenix connector]
Control: 1x RS-232 [3pin-3.5mm Phoenix connector]
1x LAN (PoE) [RJ45 jack]
1x USB 2.0 HOST [USB Type B, 4-pin female]
2x USB 2.0 DEVICE [USB Type-A, 4-pin female]
Decoder Works with iSwitch 2000D-R
Housing Aluminum panel + Iron case
Color White panel + Black case
Dimensions 115.9mm [W] x 114.3mm [H] x 44.25mm [D] 
Weight 350g
Power Supply Input: AC100 – 240V 50/60Hz, Output: DC 12V/2.5A (US/EU standards, CE/FCC/UL certified)
Power Consumption 12W (Max.)
Operating Temperature 32 – 104°F / 0 – 40°C
Storage Temperature -4 – 140°F / -20 – 60°C
Operating Humidity 20% – 80% (relative humidity, no condensing)
Storage Humidity 10% – 90% (relative humidity, no condensing)
Download
  • iSwitch 2000D-WPT User Manual_V1.0.pdf
    8.74M
    2025-02-26
Related Products
  • iSwitch 2000D (Dante)
    Both Input and output video resolution is up to 4K60 4:4:4 Integrate both Copper and Fiber ports redundancy Dante enabled Support unicast and multicas…
  • iSwitch 265K
    Works easily with an Ethernet switch, no configuration is required Plug and play Supports visual control through a tablet/cellphone. Easy to build an …
  • iSwitch 265TR
    Up to 4K60Hz (4:4:4), 18Gbps video bandwidth, HDMI 2.0b, HDCP 2.2 Audio formats LPCM 2.0CH 48kHz Transceiver design of encoder and decoder, fiber and …
  • iSwitch SDV
    SDVoE 4K60 AV over IP Transceiver with Fiber Support video resolution up to 4k2k@60Hz 4:4:4 Flexible transceiver design (Encoder, Decoder, Copper port…
LEAVE MESSAGE

Get in touch with INFOBIT team!