iTrans DX-22-US

2x Inputs + 2x Outputs (Dante® in and Dante® out)

Balanced/unbalanced XLR analog audio

MIC Phantom 48V Power and on/off via a hard button

Input sensitivity and output gain control to adjust for different levels of MIC/XLR

Dante® audio sampling rate supports 44.1/48/88.2/96KHz@24bit

Configurable Dante® device latency (supports 1, ,2 or 5ms configurable using Dante® Controller)

Supports AES67 RTP audio transport

With a magnetic cover, easy to install.

PoE & local power options

Standard 2-GANG US faceplate design

Chat Now

All Dante

The iTrans DX-22-US Analog wallplate let you use your favorite analog audio gear with any Dante- connected system, delivering the interoperability, performance and scalability that only networking can bring. Cost effective, compact and built for the road, it brings the modern network connectivity that every audio pro needs in their toolbox.

Magnetic Cover

With 4x magnetic points, it is super easy to install or repair.

Datasheet

Model	iTrans DX-22-US
Name	XLR Dante Wallplate US version
Network Bandwidth	100M
Control Method	Dante® Controller
Audio Latency	Configurable Dante® device latency (Supports 1, 2 or 5ms configurable using Dante® Controller)
Audio Formats	DANTE: Digital audio in/out, PCM 2CH 44.1K-96KHz 16/24Bit LINE In: analog audio, Balanced/unbalanced connection, Max input level 24dBu MIC In: analog audio, Balanced/unbalanced connection, Max input level 50mVRMS LINE Out: analog audio, Balanced/unbalanced connection, Max output level 18dBu
Output Impedance	300 Ohm
Output Level (Maximum)	18dBu (Maximum)
Frequency Response	20Hz to 20kHz (-/+0.5dB)
Dynamic Range	> 90dB@0dBu, 1kHzA-weighted
Audio S/N Ratio	> 90dB@0dBu, 1kHzA-weighted
Audio THD+N	< 0.015% at +4dBu, 1KHz
Transmission Distance	328ft/100m (CAT6/6A/7)
ESD Protection	IEC 61000-4-2:±4kV (Contact discharge), ±8kV (Air-gap discharge)
Front Panel	1x Power LED (Green Color) 1x ID LED (Green Color) 2x MIC Phantom Power 48V button with backlit LED (Green Color) 2x Audio In (3-pin XLR, Female) LINE audio, Balanced/unbalanced connection, Max input level 24dBu] [MIC audio, Balanced/unbalanced connection, Max input level 50mVRMS, 48V phantom power] 2x Audio Out [3-pin XLR, Male, analog audio, Balanced/unbalanced connection, Max output level 18dBu]
Rear Panel	1x DANTE [RJ45 connector, PoE] [Digital audio in/out, PCM 2CH 44.1K-96KHz 16/24Bit] 1x DC/12V [2pin-3.5mm phoenix connector] [12VDC/ 500mA]
Housing	Aluminum panel + Iron chassis
Color	White panel + Silver chassis
Dimensions	Wall plate: 95mm [W] x 105mm [H] x 41.2mm [D] Faceplate: 115mm [W] x 115mm [H] x 6mm [D]
Weight	Without faceplate: 359g With faceplate: 452g
Power Supply	1. PoE/PD (Class 1 IEEE 802.3af) 2. DC 12V (for the case that Switch does not support PoE)
Power Consumption	3.6W (Max)
Operating Temperature	32°F ~ 104°F / 0°C ~ 40°C
Storage Temperature	-4°F ~ 140°F / -20°C ~ 60°C
Operating Humidity	20% ~ 80% (relative humidity, non-condensing)
Storage Humidity	10% ~ 90% (relative humidity, non-condensing)

Download

iTrans DX-22-US User Manual_V1.0.pdf

3.78M

2024-12-31

LEAVE MESSAGE

Get in touch with INFOBIT team!

iTrans DX-22-US

Datasheet

Download

Related Products

LEAVE MESSAGE